Microengineering of Metals and Ceramics
Special Replication Techniques, Automation, and Properties v. 4, Pt. 2
Normal Price: $393.95
Your Price: $354.56 AUD, inc. GST
Shipping: $7.95 per order
You Save: $39.39! (10% off normal price)
Plus...earn $17.73 in Boomerang Bucks
Availability: Available to Backorder, No Due Date for Supply
Microengineering of Metals and Ceramics by Henry Baltes
Book DescriptionMicrostructures, electronics, nanotechnology - these vast fields of research are growing together as the size gap narrows and many different materials are combined. Current research, engineering sucesses and newly commercialized products hint at the immense innovative potentials and future applications that open up once mankind controls shape and function from the atomic level right up to the visible world without any gaps. Continuing from the previous volume, authors from three major competence centres for microengineering here cover all aspects of specialized replication techniques and how to employ state-of-the-art technologies for testing and characterizing micro-scale components, and illustrate quality control aspects and strategies for automation of production procedures in view of future industrial production and commercialisation.
Buy Microengineering of Metals and Ceramics book by Henry Baltes from Australia's Online Bookstore, Boomerang Books.
Book DetailsISBN: 9783527314935
(246mm x 186mm x 21mm)
Imprint: Wiley-VCH Verlag GmbH
Publisher: Wiley-VCH Verlag GmbH
Publish Date: 12-Aug-2005
Country of Publication: Germany
Books By Author Henry Baltes
CMOS-MEMS, Paperback (April 2013)
This edition of 'CMOS-MEMS' was originally published in the successful series 'Advanced Micro & Nanosystems'. Here, the combination of the globally established, billion dollar chip mass fabrication technology CMOS with the fascinating and commercially promising new world of MEMS is covered from all angles.
Enabling Technologies for MEMS and Nanodevices, Paperback (April 2013)
This edition of 'CMOS-MEMS' was originally published in the successful series 'Advanced Micro & Nanosystems'. A close look at enabling technologies is taken, the first section on MEMS featuring an introduction to the challenges and benefi ts of three-dimensional silicon processing.
Microengineering of Metals and Ceramics, Hardback (July 2005)» View all books by Henry Baltes
Illustrates the process from designing and simulating microcomponents of metallic and ceramic materials to replicating micro-scale components by injection molding.
» Have you read this book? We'd like to know what you think about it - write a review about Microengineering of Metals and Ceramics book by Henry Baltes and you'll earn 50c in Boomerang Bucks loyalty dollars (you must be a member - it's free to sign up!)
Author Biography - Henry Baltes
Prof. Dr.-Ing. Detlef Lohe studied mechanical engineering at the Technical University of Karlsruhe, Germany and obtained his Ph.D. in 1980. After heading the microstructure and mechancal behaviour working group there, he was appointed in 1991 as professor for materials science at Paderborn University, Germany, where he received an award for outstanding teaching achievements in 1994. In the same year, he returned to the Institute for Materials Science and Enginering I at Karlsruhe Technical University as its Director. He is Speaker of the Collaborative Research Centre 499 "Design, production and quality assurance of molded microparts constructed of metals and ceramics" and has been a Senator of the Deutsche Forschungsgemeinschaft (DFG) since 2003. His research interests focus on metallic and ceramic materials properties and durability under different kinds of stress, component manufacture and behaviour, optimisation of heat treatment methods, and failure analysis. Prof. Dr.-Ing. Jurgen Haubetaelt studied Physics and Materials Sciences at the University of Erlangen, Germany. After his doctorate and a research stay at Stanford University he joined Degussa AG in 1977, starting in metals research. After having worked as technical director in Degussa-s subsidiary in New York City, he returned to Germany in 1985 and was first in charge of metals research, then managed the entire materials development und process technology of Degussa-s corporate division "Metals". In 1993 he joined Forschungszentrum Karlsruhe as head of the Institute of Materials Research III. In addition, he was appointed professor at Freiburg University as Chair for Micromaterials Process Technology at IMTEK in 1996. In 1998 he became member of the supervisory board of Norddeutsche Affinerie AG, Hamburg.
Bestselling Books: Our Current Bestsellers | Australia's Hottest 1000 Books | Bestselling Fiction | Bestselling Crime Mysteries and Thrillers | Bestselling Non Fiction Books | Bestselling Sport Books | Bestselling Gardening and Handicrafts Books | Bestselling Biographies | Bestselling Food and Drink | Bestselling History | Bestselling Travel Books | Bestselling School Textbooks & Study Guides | Bestselling Children's General Non-Fiction | Bestselling Young Adult Fiction | Bestselling Children's Fiction | Bestselling Picture Books | Top 100 US Bestsellers
Phone: 1300 36 33 32 (9am-5pm Mon-Fri AEST) - International: +61 2 9960 7998 - Online Form
Address: Boomerang Books, 878 Military Road, Mosman Junction, NSW, 2088
© 2003-2017. All Rights Reserved. Eclipse Commerce Pty Ltd - ACN: 122 110 687 - ABN: 49 122 110 687
For every $20 you spend on books, you will receive $1 in Boomerang Bucks loyalty dollars. You can use your Boomerang Bucks as a credit towards a future purchase from Boomerang Books. Note that you must be a Member (free to sign up) and that conditions do apply.